Light Dimmer Push Button LED Trailing Edge Mechanism
$29.00
SKU:
LD/PB
Categories: Large Dolly, Opal Glass, Outlet & Switch, Power Clip, Slim Elite, Slim Wafer
Description
- What is the OPERATIN VOLTAGE of the push button dimmer switch?
-220-240V ~
- What is the MAXIMUM/MINIMUM LOAD of the push button dimmer switch?
-Max: 350W
-Min: 10W
- What is the FREQUENCY of the push button dimmer switch?
-50Hz.
- What is the DIMMING MODE?
-Trailing Edge.
- What is the CONTROL METHOD of the push button dimmer switch?
-One way.
- How is the compatibility of the push button dimmer switch with LED, LV Halogen lighting and incandescent lighting?
-Dimmable LED lamps: 10-150W
-LV Halogen lighting with electronic transformers: 10-350VA
-Incandescent lighting, MV halogen lamps: 10-350VA
- Can the dimmer be installed by a non-electrician?
-No, the installation must be carried out by a licensed electrician. Please read instruction before commencing installation and retain for future references. Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician.
- Do I need a neutral wire for connection?
-Live only two wire connection. No neutral required.
- How does the push button dimmer work?
– Short press the button to on/off and long press to dim up/down the light.
- Can I adjust the brightness of dimming?
-Yes.
- a) Minimum Brightness
If a LED becomes unstable at low dimming levels, it can flicker or pulse on/off. The dimmer’s minimum brightness can be set to a level above the point at which a lamp flickers or pulses.
1) Remove the top tap.
2) Hold down programming button until LED slow flashing.
3) Hold down the button to the setting level.
4) Double press the button to exit programming mode.
- b) Maximum Brightness
The maximum brightness level provided by the dimmer can be set to suit customer requirements.
1) Remove the top tap.
2) Hold down the programming button when LED start slow flashing then press the button again the LED will start quick flashing.
3) Hold down the button to the setting level.
4) Double press the button to exit programming mode.
- Dose the push button dimmer have a LED indicator?
-Yes. The blue led indicator will be on when the dimmer is on.
- Do I need to adjust the brightness of the push button dimmer every time I turn on?
-No. The dimmer has the option to turn on at the brightness level set when the lights were turned off/on at the last setting brightness.
- Does this push button dimmer switch have any protection features?
-Yes, it comes with in-built overload, short-circuit, over current and over temperature protection.
- Is this push button dimmer switch compatible with Clipsal style plate or HPM style plate?
-It can fit both types of plates without using any adaptor.
- Can more than one dimmer be connected in parallel or series to control the same load from two different locations?
-No.
- Is the dimmer mechanism wiring polarity sensitive?
-No.
- Â Â What is the warranty carried on the push button dimmer switch?
-3 Years.
Additional Information
Additional Information
Model: LD/PB
Approval: GMA-508707
Operating Voltage: 220-240V~
Frequency: 50Hz
Maximum Load: 350W
Minimum Load: 10W
Dimming Mode: Trailing Edge
Control Method: One way
Dimmable LED lamps: 10-150W
LV Halogen lighting with electronic transformers: 10-350VA
Incandescent lighting, MV Halogen lamps: 10-350VA
Functions:
a) Short press the button to on/off and long press to dim up/down the light.
b) Minimum Brightness: If an LED becomes unstable at low dimming levels, it can flicker or pulse on/off. The dimmer’s minimum brightness can be set to a level above the point at which a lamp flickers or pulses.
1)Remove the top tap.
2)Hold down programming button until LED slow flashing.
3)Hold down the button to the setting level.
4)Double press the button to exit programming mode.
c) Maximum Brightness: The maximum brightness level provided by the dimmer can be set to suit customer requirements.
1)Remove the top tap.
2)Hold down the programming button when LED start slow flashing then press the button again the LED will start quick flashing.
3)Hold down the button to the setting level.
4)Double press the button to exit programming mode.
d) LED Indicator: The blue led indicator will be on when the dimmer is on.
e) Memory Dimmer: The dimmer has the option to turn on at the brightness level set when the lights were turned off/on at the last setting brightness.
f) Protection: Overload, short-circuit, over current, over temperature protection.
Related products
-10%

Select options
This product has multiple variants. The options may be chosen on the product page
White
Black
Glass-look OPAL Double Outlet GPO with LED Press Push Button Switch Dual USB Socket 2.1A 5V 10A
$58.50 – $65.00-10%

Select options
This product has multiple variants. The options may be chosen on the product page

Select options
This product has multiple variants. The options may be chosen on the product page